|
What you need:
black,
white,
and pink fuse beads,
small square pegboard (18x18 beads),
greaseproof paper or baking parchment,
dry iron,
pair of tweezers,
thread and needle or wire,
glue
Fill the pegboard completely with black and white fuse beads. Use white as the main colour and place some black spots in between.
When you have finished applying the beads, preheat the iron.
Do not use steam.
Put a piece of greaseproof paper (or baking parchment)
on the beads and iron them until they
fuse.
Let the beads cool down for some time and remove them from the pegboard. Iron the back as well. You need two of these plates.
They will become top and bottom of your box.
Afterwards make four pieces for the sides. Each side needs to be 8x17 beads high. Tip: If you use a large pegboard, several parts can be made at the same time. But leave some space between the
parts.
The pattern is the same as before, mainly white with some black spots.
Example:
Leave those pegs empty that are red in the pattern.
The next part will help the top fit to the box. Fill the small pegboard completely with beads except the two outer rows. You can use black or white beads for that.
You might want to decorate the top with a cow face as well:
Iron the cow face, too.
Connect the side parts to one of the square plates. Therefore put the side parts at a right angle on the bottom plate and fasten the plates with white wire or
thread.
Connect the side parts to each other as well.
For the top put the other three plates on top of each other. The cow face is applied diagonally to the large plate. Put the small plate on the other side of the large plate in the
middle.
You can stick the plates together with glue.
Put the top on the box and your box is ready.
©
by kikisweb
|
