|
What you need:
beads (about 4-6mm / 0.16-0.24in),
thin craft wire
Cut off a piece of wire that is about 90cm / 35in / 1yd long.
String twelve green beads and six blue beads onto the wire in the following order: two green beads, one blue bead, two green beads, and so on.
Create a ring out of these beads by pulling one end of the wire through all beads again. Afterwards, the ends of the wire should be equally long and at one
place.
String three white beads and then two golden beads onto one end of the wire.
Pull the end of the wire back through the last but one bead and apply three more white
beads.
Pull the end of the wire through the next blue bead of the ring.
String four silver and four golden beads onto the other end of the wire.
Pull the end of the wire back through the last but one
bead.
String two golden beads and four silver beads onto the wire.
Pull the end of the wire through the blue bead of the ring that you have used for the smaller point of the star. Now both ends of the wire are at the same place again.
Create the next point of the star by starting again with three white and two golden
beads.
Repeat this pattern until the star is finished.
Use the rest of the wire for
hanging.
Tip:
Of course you can also use beads in different colours for creating stars.
©
by kikisweb
|
